Phone: 800-664-0063						www.tigerfoam.com
	E-84 Fire Rated Formula!						Safe EZ to Use
	>>> Change GREEN Boxes Only <<<
	Calculation Chart for Stud Wall Cavity - Open wall surface spray formula
							Or Metal Building
	Sq. Feet of wall:
	(Length X Height) Ft.			X		total running wall area
	Sq. Feet of roof:			X		(if applicable  - Metal Buildings)
	Less Windows and Doors				(Total Square Footage of Doors & Windows)
	Number of Inches:			(applied inches of expanded foam)
	Buy Number of Kits:				TF600FR Kits
	Enter Price per kit
	Product Cost:				Estimates of Heating & Cooling costs below include
					estimated price increases in gas and fuel this year.
	Est. Heat/Cool Month				Heating and cooling costs calculated at
	(non-foam)		Your Neighbor		levels consistant with avg. insulated space
			without foam		using non-foam insulations.
	Est. Heat/Cool Month				Heating and cooling costs calculated at
	(with foam)		Your House		levels consistant with avg. insulated space
			with Foam		using foam insualtions to seal & insulate.
	Savings per month:				This is the amount that goes back in your
					pocket each month.
	Payback period:				Compared to 30% higher cost for foam than
	(in months)				installed fiberglass only.
	Note: this is a general estimation tool and works for square footage coverage in
	excess of 600 square feet total, which will be most projects. Smaller projects
	requiring less than 600 board feet should order smaller 200 bd. ft. kits.
	Disclaimer: actual results may vary. This calculator is a guide and not a guarantee
	of actual savings, though we believe it is representative of average results.